CANON MK2500 CABLE ID PRINTER ENGLISH KEYBOARD.
Call now 00966540480369
Call or email for price
Dammam, Riyadh, Jeddah - Saudi Arabia (Also ship all over GCC & world)
Feel free to ask any question before you decide to buy.
WE DELIVER WORLDWIDE.
English language keyboard and software.
Canon MK2500 Amazingly fast, easy and clear! Bringing tremendous improvement in work efficiency! The MK2500 prints precise characters of up to 300dpi for tubes, labels and more. With a large LCD display and automatic full and half-cutting, it offers smooth and easy printing from start to finish. Character sizes: 2, 3, 6mm Print speed (tubes): up to 240cm per minute Standard output rate 42pcs./min. 5 full-size characters, consecutive print mode, fast cutting
Printable on tubes size from 1mm to 6mm
Printing up to trailing edge of tube
The MK series printers can print characters up to the edge of each tube to avoid tube waste. This contributes to long-term cost reduction.
Automatic cutting / full-cut is also possible
Each segment is partially cut automatically as it prints. The segments are easily separated manually after they come out of the printer. The cutting operation for each job can be set for full-cut, half-cut, no cut with marking, or no cut without marking.
Consecutive / serial printing
MK series printers can be set to print the same text on every segment (consecutive printing). Just enter the data and the number of segments required, then start the print. Or, MK series printer can be set to print numbers that increment automatically as the segments print (serial printing). No need to do separate entries and printing for each segment!
Specifications for MK2500
Printing Method Thermal transfer
Printing Speed Tubes: High speed: 40mm/sec.
Middle speed: 25mm/sec.
Low speed: 18.5mm/sec.
Labels: High speed: 40mm/secs.
Middle / Low speed: 25mm/secs.
Output Rate High speed: About 42pcs./min.
Middle speed: About 35pcs./min.
Low speed: About 30pcs./min.
Printing 20mm tubes, 5 full-size characters, consecutive print mode, half-cutting.
Ink Ribbons (Exclusive cassette) Black: 100m
Black for Marking Strip: 40m
Character Sizes 1.3mm (only full-width available), 2mm, 3mm, 6mm (full-width, half-width available for each)
Input Modes Alphanumeric, symbol input
Display LCD Graphic (160 x 64 dots)
Display Capacity 10 characters/line x 2 lines (full-width) or
20 characters/line x 2 lines (half-width) (3 lines editing is possible.)
Built-in Memory Print-data: Approx. 2,500 characters
Files: Approx. 15,000 characters
Service life of internal backup battery for data storage: About 5 years
Media Cutting Method Automatic full-cutting, Automatic half-cutting
Power Supply Exclusive AC Adapter
Input voltage: AC 100V - 240V 50 / 60Hz
PC Interface USB2.0 Full-Speed, Exclusive PC Connection Kit (Included)
Operating Environment 15°C - 32.5°C (59°F - 90.5°F),
10% - 85% RH
Range is lowered to 5°C (41°F) with Tube Warmer option installed
Storage Environment 5°C - 35°C (41°F - 95°F),
10% - 90% RH
Dimensions (W x D x H) 250 x 300 x 85mm (9.8 x 11.8 x 3.4in.)
Weight 2kg (4.4lb.) (printer only)
Tube PVC tube, φ 2.5 - 6.5mm, 0.5mm thick
Tube attachment option is required (Other tubes should be tested for printing.)
Label Tape (Exclusive cassettes (White, Yellow, Silver)) Width: 6mm, 9mm, 12mm
Length: 30m (Silver: 27m)
Segment length can be set to 2mm through 150mm
Wrap Around Tape: Exclusive cassettes Print area only: White
Other areas: Transparent
Take-up length: 8m
Width: 6 - 150mm (depends on cut setting)
Marking Strip Specified thickness 0.5mm
Plates of other thickness should be tested for printing
Width: 8mm, 8.5mm, 9mm, 9.5mm, 10mm
Plate Attachment option is required
Exclusive ribbon cassette is required
Manual cut only
Heat Shrink Tube Shrink tube: φ 3.0 - 6.4mm
Tube attachment option is required.
(Other tubes should be tested for printing.)
4mm ID Strip (Exclusive Cassette (White, Yellow)) Width: 4mm
Segment length can be set to 8mm through 150mm